Mishin’s big coil, MGTF. It works in different modes depending on the connection option.
Mishin’s universal USB-coil “3 in 1”. The coil is wound from an expensive, high-quality MGTF wire (copper stranded with fluoroplastic insulation). This option significantly improves the parameters of the coil and, accordingly, increases the strength of the electric component of the field (statics). The electrical Q-factor of the coil (in the low-voltage version of switching on) is approximately 110-120 or more.
All four ends of the two halves of the bifilar coil windings nested into each other are brought out to the USB connector. The coil type in this case is determined only by the external connection.
The coil type in this case is determined only by the external connection – if the coil is connected to the generator through an uncolored cable, then it works as a low-voltage capacitive.
< p> If the coil is connected to the generator via a color-coded cable, then (depending on the cable used) it works either as a high-voltage capacitive ( read article … ), or static. For the buyer, this is a tangible savings – for the price of one, we get three fundamentally different coils in action, albeit in the same case. Switching modes takes seconds. The high voltage capacitive mode cable is color coded BLUE.
Connection cables are not included with the coil. If desired, they can be purchased separately.
In the high-voltage capacitive mode, the magnetic component of the field is reduced by 80-90 times, and the electrical component (static) is increased by 3-5 times. The usual field indicator with a coil in this mode, as a rule, does not light up.
- outer diameter: 225mm;
- winding: MGTF cable (copper stranded with photopolymer insulation);
- connection: USB connector;
- flexible lead-in cable and elastic input damper for coils in a plastic casing (therefore, the cable does not break) ;
- reliability and beauty of the design;
- high-quality ABC-plastic;