Big universal Mishin coil (3 in 1), PTFE wire
Big universal Mishin coil «3 in 1». Coil winding is made of expensive, high-quality PTFE wire (copper stranded with fluoroplastic insulation). This option significantly improves the parameters of the coil and, accordingly, increases the intensity of the electric component of the field (static). The electrical q-factor of the coil (in the low-voltage version of the inclusion) is about 110-120. Depending on the connection option, it works in different modes. All four ends of the two, inserted into each other halves, of bifilar coil windings are brought out to a USB connector. In this case the coil type depends only on the external connection — if the coil is connected to the generator directly, it then functions as a capacitive, low-voltage coil, if the coil is connected to the generator via a step-up adapter, – (cable plug has a jumper connecting in series the halves of two coil windings, – in this case the coil functions as a static one (purely static coil). It proves a telling economy for purchasers — at the price of one coil we acquire three different, as regards their action, coils, though enclosed in the same case. It takes just seconds to change over the mode of operation.
In the high-voltage capacitive mode, the magnetic component of the field is reduced by 80-90 times, and the electrical component (statics) is increased by 3-5 times. The usual field indicator with a coil in this mode, as a rule, does not light.
It is possible to order a capacitive coil without any step-up adapter – in this case it will function as a standard capacitive coil, while the step-up adapter may be ordered later, if requir…
- Big size of winding;
- PTFE wire;
- connection : USB connector;
- high-quality cable for generator connection;
- fail-safe design and attractive view;
- high-quality polished plywood, 6 mm-thick;
- The set is made complete with: adapter + cable for connection in purely static mode (Tesla), as well as a cable for connection in capacitive mode;